Research Article

From Periodic Inspection to Continuous Monitoring: A Case Study of Camera-Based Joint-Angle Alerting for Ergonomic Risk on a Printed Circuit Board Assembly Line

Authors

  • Mariane Aguiar de Melo Technologist in Systems Analysis and Development from. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Tiago Carvalho de Almeida Technologist in Systems Analysis and Development. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Tony Douglas Martins Pena Bachelor in Computer Science. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Adriano Martins de Melo Postgraduate Specialist in Teaching for Professional and Technological Education. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Renato Moreira Teixeira Junior Postgraduate Specialist in Advanced Manufacturing Engineering for Industry 4.0. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Alessandra Castro Rocha Postgraduate Specialist in Innovation Management with an Emphasis on Research, Development, and Innovation (P&DI). Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Daniel Angelo Oliveira de Abreu MBA in Information Management, Technology, and Innovation. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.
  • Arthur Drumond Parente Project Management Specialist. Conecthus Institute of Technology and Biotechnology of Amazonas, Manaus, Amazonas, Brazil.

Abstract

Ergonomic risk management in electronics manufacturing still relies largely on manual, periodic inspections that offer little continuous visibility of operators' postural exposure. This case study reports the design, implementation and pilot-line validation of a Web-based ergonomic monitoring platform at an electronics manufacturing plant in Manaus, Brazil, developed over a seven-month applied research and development cycle (January–July 2026) by a technology institute in partnership with the manufacturer. The platform detects operators in industrial camera streams with a YOLOv8l detector, extracts body and hand landmarks with MediaPipe Pose and Hand Landmarker, computes joint angles, classifies each monitored joint into safe, light, moderate or high-risk angle bands with ordinal scores, and raises an alert only when a high-risk angle persists beyond a configurable holding time. Angle bands and persistence rules were defined with an NR-17-oriented ergonomics consultancy and are editable through the interface. Events flow through a containerised micro-service pipeline (RTSP ingestion, RabbitMQ messaging, REST API, SQL Server) to a Web interface with real-time monitoring, dashboards, PDF reports and a 3-D skeleton view. On a 500-frame sample from the surface-mount technology line, compared with human inspection, operator detection achieved 94.5% precision, 98.2% recall and a 96.3% F1-score; the reported hit rate on critical joints was 91.8% and the continuous hand-tracking rate 89.4%. Between 22 May and 5 August 2026 the platform recorded 409,527 alert events, with a mean uninterrupted tracking persistence of 72.0 s at 15 frames per second and a mean joint angle of 129.14° for high-risk events. Under approximately 250 concurrent requests the pipeline sustained 1.64 frames per second with about 650 ms end-to-end latency and no critical failures during a 152 s stress run, and the system passed formal acceptance testing with zero open issues (self-assessed Technology Readiness Level 6). The case shows that pose-based joint-angle alerting can be integrated into a live industrial IT environment, but also that the evidence produced does not yet establish ergonomic validity: no comparison with RULA/OWAS expert scoring, no joint-angle error against a reference measurement and no health-outcome data were obtained. These gaps define the agenda for moving from prototype to deployment.

Article information

Journal

Journal of Computer Science and Technology Studies

Volume (Issue)

8 (12)

Pages

197-209

Published

2026-11-20

How to Cite

Melo, M. A. de, Almeida, T. C. de, Pena, T. D. M., Melo, A. M. de, Teixeira Junior, R. M., Rocha, A. C., Abreu, D. A. O. de, & Parente, A. D. (2026). From Periodic Inspection to Continuous Monitoring: A Case Study of Camera-Based Joint-Angle Alerting for Ergonomic Risk on a Printed Circuit Board Assembly Line. Journal of Computer Science and Technology Studies, 8(12), 197-209. https://doi.org/10.32996/jcsts.2026.8.18

Downloads

Views

6

Downloads

8

Keywords:

Human pose estimation, occupational ergonomics, industrial case study, computer vision, joint-angle thresholds, real-time alerting, musculoskeletal disorders, NR-17, Industry 4.0, printed circuit board assembly