Research Article

Determination of GTN Model Parameters Based on Artificial Neutral Network for a Ductile Failure

Authors

  • YASSINE CHAHBOUB Doctorant, Université de Miskolc, Hungary
  • SZAVAI Szabolcs Chef de service, Département d'intégrité structurelle et de technologie de fabrication, Institut Bayzoltan kft de recherche scientifique

Abstract

The Gurson – Tvergaard – Needleman (GTN) mechanical model is widely used to predict the failure of materials based on laboratory specimens, direct identification of Gurson – Tvergaard – Needleman parameters is not easy and time-consuming, and the most used method to determine them is the combination between the experimental results and those of the finite elements, the process consists of repeating the simulations several times until the simulation data matches the experimental data obtained at the specimen level.
This article aims to find GTN parameters for the Compact Tension (CT) and Single Edge Tensile Test (SENT) specimen based on the Notch Specimen (NT) using the Artificial Neural Network (ANN) approach. . This work presents how the ANN could help us determine the parameters of GTN in a very short period of time. The results obtained show that ANN is an excellent tool for determining GTN parameters.

Article information

Journal

Journal of Mechanical, Civil and Industrial Engineering

Volume (Issue)

2 (1)

Pages

01-05

Published

2021-01-15

How to Cite

CHAHBOUB, Y., & Szabolcs, S. . (2021). Determination of GTN Model Parameters Based on Artificial Neutral Network for a Ductile Failure. Journal of Mechanical, Civil and Industrial Engineering, 2(1), 01–05. https://doi.org/10.32996/jmcie.2021.2.1.1

Downloads